0
Product Amount Price

While here is empty

COOLER COOLER

COOLER

3
Brand

3DVAPE RUS

Weight

1 g

- +

Be careful when ordering, look at the picture and choose a complete set according to the number, read the description below. The fan is intended ONLY for installation on an axis with a diameter of 8 mm, and only for a closed 608 bearing, if the bearing is open, the fan will catch dust on the balls! For those who have heated 608 bearings at high speeds of 6000 - 12000 r / min, I present a system of forced cooling of a closed 608 bearing installed in the COILBUILDER machine.    Cooler is the simplest and very efficient bearing cooling system. The higher the speed of rotation of the bearing / fan, the stronger the airflow. The angles and shape of the fan blades are designed in such a way that during rotation it is possible to maximize the air flow in any direction of rotation and not create additional noise and load.    The author Korolev Eugene (Russia) on March 8, 2019. Copying is prohibited!


ATTENTION, it is advisable to use ONLY protected bearings with the fan, the protection will limit the ingress of dust (blown by the fan) into the bearing.

Variants of complete sets:

No. 1. Only a fan (if you already have an original 3DVAPE CoilBilder with a closed 608 bearing, then you can only order this fan and install it on your own). The angles and shape of the fan blades are designed in such a way that during rotation it is possible to maximize the air flow in any direction of rotation and at the same time not create additional noise and load.
No. 2. Fan + hairpin + carbine (fitting the stud under the bearing yourself!)
No. 3. Fan + stud + carbine + 608 hybrid bearing.
№ 4. Head TURBO COOLER 608 assembly. For those who wind coils at extra speeds of 7000 rpm.
In the head there are 10 through holes passing along the edge of the outer ring 608 of the bearing. The cooling system only works in conjunction with a fan! The direction of rotation of the fan is not important, in any case air flows will be forced and the bearing will be cooled.
The angles and shape of the fan blades are designed in such a way that during rotation it is possible to maximize the air flow in any direction of rotation and at the same time not create additional noise and load.
No. 5. Standard head with 608 hybrid bearing assembly with stud, fan and carabiner.

There are no comments yet.

Leave a comment

Connect with us

If you still have questions, you can leave them here.