ClipCoil-PRO-6 © - a professional tool.
Author Korolev Evgeniy (Russia). Copying is prohibited!
Clamp ClipCoil-PRO-6 © (ClipCoil-PRO-6 ©) is FORMULATED ONLY for fixing to the axis of the machine CoilBuilder PRO ©
In the clamp it is possible to fix several wires in a row, this is necessary when you manufacture complex windings.
ClipCoil-PRO-6 © is made of high-strength plastic, clamping steel sheen, and all hardware is made of stainless steel.
The kit includes:
- clip ClipCoil-PRO-6 © with clamping screw (hex 3 mm) made of high-strength steel (12)
- additional screw of lamb (it can be installed if necessary)
- steel nail, which is designed to securely fix the clamp on the axis of the machine CCoilBuilder PRO ©
Installation procedure:
1 - Unclip the carbine on the aluminum axis of the CoilBuilder and remove it
2 - put on the axis of the ClipCoil 3.1 PRO machine until the through hole is aligned
3 - in the hole, insert the stud from the kit and if necessary bend the tip of the nail, instead of the nail, you can use any wire with a diameter of 1-1.2 mm