LOCKer HARD
Button lock of several wires in a row (pressed - clothed / pressed - removed).
The author of the idea, design and model name LOCKer HARD - THE KINGDOM OF EVGENY -
3DVAPE.RU of April 15, 2020.
LOCKer HARD works similar to a slider, but it can be removed and worn on the wire at any time.
The LOKer model was developed according to the wishes of many professional co-builders from different countries.
Differences from V2 and V3 are reinforced springs and steel clamp.
Advantages of LOCKer HARD:
- steel elements are welded into the clamping part to extend tool life
- maximum workpiece size 4 x 1.5 mm
- Dressed on top of the wire anywhere, nothing to thread !!!
- fixing by pressing and releasing the button
- inside there are 2 steel springs of Russian production, they are also installed in all ClipCoil clamps.
- the weight is only 2.9 g (for example, A4 paper weight = 5 g)
- the lock / stop / LOCK is designed in the clamping jaws, which will not allow the LOCKER to fly off at high speeds
- manual assembly and the most important manual ACCURATE gluing of the model. Yes, the Locker model is not collapsible, this is done to increase reliability.
Simple version of LOCKER V3