COIL WIRE V2 (NEW) - the updated coil for провлоки from 3DVAPE RUS.
Author's model of KOROLEV EVGENIY (Russia, 3DVAPE.RU). Copying is FORBIDDEN! Date of creation of the model "COIL WIRE" - March 16, 2016 - https://vk.com/3dvape?w=wall-108361058_1470
After testing the 1st and 2nd versions of the coils, it was decided to upgrade the wire attachment points on the coil.
And here I present a new version of very convenient fixatives.
Options:
- 6 convenient wire clips
- outer coil diameter 80 mm, width 18 mm
- the diameter of the inner hole is 6 mm (as with most standard coils)
- 1 hole for fixing the beginning of the winding of the wire
- circumference of the wire - about 220 mm
- capacity of the wire (0.1 mm - more than 1000 m, 0.15 - more than 600 m, 0.4 - 100 m, 0.5 - 100 m).
- excellent strength and light weight
- convenient platforms for holding the coil with fingers during operation
- 2 planes for inscriptions or for labels
- the inside of the sides is mirror-smooth, which excludes any wire hooks
- reusable application! You can always reel up a new wire and use more :)
- color ONLY BRANDED "3DVAPE" - black / orange
In appearance the model is not complicated, but it is made long enough. 3D printing 1 hour + hand-glued + manual processing + drying 24 hours.